Final week I went to Walmart to seek out one thing to color a monogram on with craft paint for my daughter. She is shifting into an house in August and I’m serving to her with the furnishings.
My daughter is a horse lover and having this stool in her new place will add a little bit of equestrian fashion to her new house. I personalised it only for her by portray her initials within the middle.
How one can Paint a Monogram on Furnishings
provides wanted:
Folks Artwork craft paint in White Enamel Folks Artwork craft paint in Black Plaid Foam Curler high Paint brushes – each flat and pointy Monogram print out Saddle Stool – must be assembled after you paint the highest. Non-yellowing spray sealer in a satin end Sandpaper Switch paper – I had some readily available – use a coloration so it is possible for you to to see the transferred picture on the black floor of the stool Ruler Pencil Painter’s Tape Scissors Cotton Swaps
See This Put up:
How one can make your monogram in Microsoft Phrase.
I used Photoshop Parts to make the monogram. I used the font Cursif. The ” H” is 340px. The “Okay” and “C” are 24p px. I then positioned a circle round them. There’s a hyperlink on the finish of the submit to get the Cursif font. It’s a freebie.
I additionally made a picture of a chevron sample. I printed each of them out on draft mode on my printer. You don’t want these pictures to be top quality as they’re simply going for use for tracing functions. I sized the monogram to be 8” x 8”. The chevron sample I match to an 8 1/2” 11” web page dimension.
I selected to color the circle for the monogram first and do the chevron sample after. I needed to ensure the circle was centered and in place earlier than doing the rest, however you possibly can hint the chevron first after which add the circle. No proper or fallacious means.
Minimize the monogram out and ensure the chevron sample is tall sufficient.
Measure the middle of the stool high and mark an X within the middle.
To search out the precise middle of the monogram circle. fold it into quarters. Use the fold level as your middle mark to line up on the “x” on the stool high.
Place a chunk of switch paper – graphite/coloration aspect down after which middle the monogram print-out over the X. Use painter’s tape to safe. Hint over the circle with a pointy pencil level. You don’t must press exhausting – a bit of strain is all that’s wanted to switch the picture. Hint over the inside and outer strains of the circle after which take away the print-out.
Maintain a small piece of sandpaper in your hand and gently rub it over the circle to tough up the shiny end so the paint will adhere higher. Clear off the sanding grit with a tack material or damp paper towel.
Utilizing a sharp craft brush, define the inside pencil line of the circle with the white paint.
I selected to color the circle first to ensure I had it centered, however so long as you may have the define drawn in white paint, you may wait to color the circle till you may have the chevron stripes taped on after which paint over the whole high without delay.
Screw on a curler high to the white craft paint bottle and gently squeeze the bottle till paint fills the curler. Roll it on a scrap piece of paper first to get it going. As soon as the froth has paint throughout it. Roll the paint on contained in the circle. I did 3 coats – letting every coat dry earlier than making use of the subsequent.
To switch the chevron sample to the stool. Lay switch paper graphite aspect down after which place the chevron sample over it ensuring it’s lined up straight. Tape it right down to safe. Utilizing a pointy pencil hint the perimeters of the zig-zags . Take away the print-out and switch paper. In the event you look intently on the picture above you may see the faint strains of the sample.
Repeat on the opposite aspect of the stool ensuring to line up the sample. If graphite from the switch paper will get on the paint. Gently wipe it off with a moist rag.
Lay down the painter’s tape following the chevron sample. Run your fingers over the perimeters of the tape to ensure they’re sealed. I added tape to the perimeters of the highest -no sample switch wanted. You will notice the place so as to add the tape – simply lengthen the zig-zag strains.
Run a chunk of sandpaper over all of the non-taped areas of the highest and aspect of the stool. Take away the sanding mud with a tack material or damp towel.
Utilizing the froth topped curler – roll excessive and edges with white paint. If any areas want smoothing, use a flat tipped brush to even the rolled on floor out. Let it dry. I utilized 3 coats to get full protection.
Word: Essential – Take away the tape proper after making use of the final coat of paint. In the event you let it dry and take away the tape – the paint will come off with the tape. Once I eliminated mine there have been some areas that I wanted to the touch up. I used a small flat tip brush to do that.
Middle the monogram print-out and switch paper over the circle. Tape it down after which rigorously hint over the letters with a pointy pencil.
Once you take away the print-out and switch paper you can be left with this.
My eyes wanted a bit extra stay-in-between-the-lines steering, so earlier than I began portray the letters, I went over the transferred strains with a wonderful tipped black marker. I used a wonderful tipped pointy brush to fill every letter in. I did one coat after which went over a second time to wash up the perimeters that I tousled.
I used a flat tip brush to color the circle across the monogram. In case you have any areas that want cleansing up use a sharp tip cotton swap to wash up any painted strains.
As soon as the paint is touched up and dried. Spray 1-2 coats of non-yellowing sealer excessive, letting every coat dry earlier than making use of the subsequent.
Now my daughter may have a spot to retailer her horse gear or simply use it to sit down on.
Click on right here to put in the Cursif free font in your pc.
Copy the chevron sample to avoid wasting in your pc to print.
